Роутер Teltonika RUT230

MOBILE

Mobile module 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps.

Status Signal strength (RSSI), EC/IO, RSCP, Bytes sent/received

Bridge Direct connection (bridge) between mobile ISP and device on LAN

SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS (optional), SMS to EMAIL (optional), SMS to HTTP (optional), SMS to SMS (optional), scheduled SMS, SMS autoreply, SMPP

Black/White list (optional) Operator black/white list

Multiple PDN (optional) Possibility to use different PDNs for multiple network access and services

WIRELESS

Wireless mode IEEE 802.11b/g/n, Access Point (AP), Station (STA)

WiFi WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter

WiFi security WPA2-Enterprise - PEAP, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher modes, Client separation

SSID SSID stealth mode and access control based on MAC address

WiFi users Up to 50 simultaneous connections

Hotspot Captive portal (Hotspot), internal/external Radius server , built in customizable landing page

ETHERNET

WAN 1 x WAN (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

LAN 1 x LAN port, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

NETWORK

Routing Static routing, Dynamic routing (Optional - BGP, OSPF v2, RIP v1/v2)

Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT (optional)

Connection monitoring Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall Port forward, traffic rules, custom rules

DHCP Static and dynamic IP allocation

QoS Traffic priority queuing by source/destination, service, protocol or port

DDNS Supported >25 service providers, others can be configured manually

Network backup VRRP, Mobile, Wired and Wi-Fi WAN options, each of which can be used as backup

Load balancing Balance your internet traffic over multiple WAN connections

NetSnapper (optional) Mobile connection management, data compression VPN client (not available in standard FW)

SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)

SECURITY

Authetication Pre-shared key, digital certificates, X.509 certificates

Firewall Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Atack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

WiFi security WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation

VLAN Tag based VLAN separation

Mobile quota control Set up custom data limits for the SIM card

WEB filter Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only

Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN Multiple clients and server can be running simultaneously, 12 encryption methods

OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC IPsec IKEv1, IKEv2, supports up to 4x VPN I

Psec tunnels, with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)

GRE GRE tunnel

PPTP, L2TP Client/Server services can run simultaneously

MONITORING & MANAGEMENT WEB UI HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log FOTA Firmware update from sever, automatic notification. SSH SSH (v1, v2) SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET TR-069 (optional) OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems MQTT (optional) MQTT Broker, MQTT publisher SNMP SNMP (v1, v2, v3), SNMP trap JSON-RPC Management API over HTTP/HTTPS MODBUS (optional) MODBUS TCP status/control RMS Teltonika Remote Management System (RMS) SYSTEM CHARACTERISTICS CPU Atheros Hornet, MIPS 24Kc, 400 MHz RAM 64MB, DDR2 FLASH memory 16MB SPI Flash FIRMWARE / CONFIGURATION WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup, restore point FOTA Update FW/configuration from server RMS Update FW/configuration for multiple devices Keep settings Update FW without losing current configuration FIRMWARE CUSTOMIZATION Operating system RutOS powered by Linux based on OpenWRT Supported languages Busybox shell, Lua, C, C++ Development tools GPL package with built environment provided INPUT/OUTPUT Input 1 x Digital Input Output 1 x Digital Output Events SMS, EMAIL, RMS POWER Connector 4 pin DC power socket Input voltage range 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33VDC 10us max. PoE (passive) Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at Power consumption < 5 W PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM) Ethernet 2 x RJ45 ports, 10/100 Mbps Status LEDs 2 x connection type status LEDs, 5 x connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED SIM 1 x SIM slot (Mini SIM – 2FF, 2st form factor), 1.8V/3V, external SIM holder Power 4 pin DC connector with 1 x Digital input and 1 x Digital output Anntenas 1 x SMA for 3G, 1 x RP-SMA for WiFi antenna connectors Reset Reset/restore to default button PHYSICAL SPECIFICATION Casing material Aluminum housing, plastic panels Dimensions 83 mm x 74 mm x 25 mm (H x W x D) Weight 125 g Mounting options Bottom and sideways DIN rail mounting slots OPERATING ENVIRONMENT Operating temperature -40 °C to 75 °C Operating humidity 10% to 90% non-condensing Ingress Protection Rating IP30 MTBF 320000 h